xiaoyi1.8.7.0C_hack
Support telnet,tftp,rtsp,no logo.
Clone this repository on a computer，
Then, format a micro SD card in fat32 format and copy the content of the folder at the root of your memory card.
If plugged, unplug the Yi camera Insert the memory card in the Yi camera Plug the Yi camera The camera will start. The led will indicate the current status :
yellow : camera startup blue blinking : network configuration in progress (connec to wifi, set up the IP address) blue : network configuration is OK. Camera is ready to use.
telnet username/password : root/1234qwer
RTSP server is on port 554.
You can access the video over RTSP on 3 urls :
High definition video and audio (h264) : http://ip:554/ch0_0.h264 Low definition video and audio (h264) : http://ip:554/ch0_1.h264 Audio (h264) : http://ip:554/ch0_3.h264
现在回到 nas 的管理界面中，打开 Surveillance Station，点击网络摄像机点新增。
之后把 IP、端口号填写上，品牌选择最上面的用户自定义。最后一个视频原路径很关键，需要填写成 rtsp://10.0.0.224:554/ch0_0.h264 把其中的 IP 地址替换成你摄像机的 IP 就可以了。
之后，就可以好好享受 Surveillance Station 的强大功能了。
2022-10-11 
